IMPORTANTnote;pleasereadandheed
Moregood-to-knowinfo:
:
MIDI preset 1 activates when the preamp is powered up. If you want to edit and/or
store other MIDI presets, you must connect a MIDI foot board or another MIDI send
deviceto the port(55) and usethis outboarddevice toselectthedesired MIDI
presetonthepreamp.
Note that the Status LED also indicates the status of components unrelated to
and .The microcontroller runsa short system check after you switch the preamp
on.Shoulditfindadefectinthememorychip(EEPROM),theLED
PresstheWrite/Copycopybuttontoconfirmthatyougotthemessage.Onceyouhave
done this, the system will be ready to run, although you may encounter problems
whenattemptingtoselectorstoreMIDIpreset.
MIDIIn
Write
Copy
35POWER
MainsConnector
CAUTION:
37MAINSFUSEBOX:
CAUTION ALWAYS makesure replacementfuses areof thesame typeand havethe
sameratingsastheoriginalfuse!Tothisend,pleaserefertothefuseratingstable.
38GROUNDLIFTSWITCH
Please note:
Mains power on/off.
Atthebackof the manual you'llfind a foldedpage offeringdiagrams of thefront and
rear panels. Please unfold and refer to it as you read through the descriptions of
featuresandfunctions!
Plug the mains cord in here. For European models, use a standard non-heating
equipmentconnectorcable.
Make sure you use an intact mains line cord with a grounded plug! Before
you power the preamp up, ensure the voltage value printed on the label under the
mainssocketisthesameasthecurrentofthelocalpowersupplyorwalloutlet.
Please also heed the guidelines set forth in the separately included pamphlet,
.
Therearchambercontainsthemainsfuseandthefrontchamberasparefuse.
:
This switch severs the circuit connecting the preamp's internal ground to the wall
receptacle's ground terminal. You can set the switch to when you
haveconnectedasignalprocessororpowerampandwanttopreventthetwodevices'
groundsfromformingagroundloopthatmanifestsinannoyinghumming.
A ground loop is an extraordinary condition. Under ordinary
circumstances, ensure the button is set to to earth the preamp to the mains
ground,therebypreventingungroundedlinenoise!
Rear Panel Features
InstructionsforthePreventionofFire,ElectricalShockandInjury
Ground Floated
Ground
willflashinapattern
offiveshortbursts.
36
15
Comentários a estes Manuais